On Wed, Sep 10, 2014 at 11:14:15AM -0700, Nicolin Chen wrote: > On Wed, Sep 10, 2014 at 7:27 AM, Markus Pargmann <mpa@xxxxxxxxxxxxxx> wrote: > > Hi, > > > > On Wed, Sep 10, 2014 at 04:46:46PM +0300, Dmitry Lavnikevich wrote: > >> This is driver for i.MX6 boards with tlv320aic3x audio codecs. > >> > >> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@xxxxxxxxxxxxxxxxx> > >> --- > >> .../bindings/sound/fsl,imx-audio-tlv320aic3x.txt | 27 ++++ > >> sound/soc/fsl/Kconfig | 13 ++ > >> sound/soc/fsl/Makefile | 2 + > >> sound/soc/fsl/imx-tlv320aic3x.c | 177 +++++++++++++++++++++ > >> 4 files changed, 219 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/sound/fsl,imx-audio-tlv320aic3x.txt > >> create mode 100644 sound/soc/fsl/imx-tlv320aic3x.c > > > > Is it possible to use the simple-card > > (Documentation/devicetree/bindings/sound/simple-card.txt) instead of > > adding a new audio card driver? There are also DT bindings for the imx > > audiomultiplexer (imx-audmux.txt). > > I don't know why my mutt doesn't display this mail. > > Anyway, if Simple Card supports audmux, yes, it's also a good idea. Simple Card doesn't support it. But there are DT bindings for the audmux device node which allow the definition of a default multiplexer setup. That configuration is applied in the probe() function of the audmux driver. Best regards, Markus -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: Digital signature
