Add YAML binding for Sercomm partition parser. Signed-off-by: Mikhail Zhilkin <csharper2005@xxxxxxxxx> --- .../mtd/partitions/sercomm,sc-partitions.yaml | 70 +++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/partitions/sercomm,sc-partitions.yaml diff --git a/Documentation/devicetree/bindings/mtd/partitions/sercomm,sc-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/sercomm,sc-partitions.yaml new file mode 100644 index 000000000000..07ea5596200c --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/sercomm,sc-partitions.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/sercomm,sc-partitions.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sercomm Partitions + +description: | + Sercomm is one of hardware manufacturers providing SoCs used in home routers. + The Sercomm partition map table contains information about non-standard + partition offsets and sizes (depending on the bad blocks presence and their + locations). Partition map is used by many Sercomm-based Ralink devices + (e.g. Beeline, Netgear). + +maintainers: + - Mikhail Zhilkin <csharper2005@xxxxxxxxx> + +properties: + compatible: + const: sercomm,sc-partitions + + scpart-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Partition id in Sercomm partition map + +required: + - compatible + - scpart-id + +additionalProperties: false + +examples: + - | + partitions + compatible = "sercomm,sc-partitions", "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + scpart-id = <0>; + read-only; + }; + + partition@100000 { + label = "dynamic partition map"; + reg = <0x100000 0x100000>; + scpart-id = <1>; + }; + + factory: partition@200000 { + label = "Factory"; + reg = <0x200000 0x100000>; + scpart-id = <2>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_21000: macaddr@21000 { + reg = <0x21000 0x6>; + }; + }; + + /* ... */ + + }; -- 2.25.1
