This series adds support for the Marvell 98DX2530 SoC which is the Control and Management CPU integrated into the AlleyCat5/AlleyCat5X series of Marvell switches. The CPU core is an ARM Cortex-A55 with neon, simd and crypto extensions. This is fairly similar to the Armada-3700 SoC so most of the required peripherals are already supported. This series adds a devicetree and pinctrl driver for the SoC and the RD-AC5X-32G16HVG6HLG reference board. In the v3 series I've dropped out a few patches. The MMC stuff is more complicated than just adding a compatible string. The mvneta changes have gone in via net-next. Chris Packham (4): dt-bindings: pinctrl: mvebu: Document bindings for AC5 pinctrl: mvebu: pinctrl driver for 98DX2530 SoC arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board arm64: marvell: enable the 98DX2530 pinctrl driver .../bindings/pinctrl/marvell,ac5-pinctrl.yaml | 72 +++++ arch/arm64/Kconfig.platforms | 2 + arch/arm64/boot/dts/marvell/Makefile | 1 + .../boot/dts/marvell/armada-98dx2530.dtsi | 302 ++++++++++++++++++ arch/arm64/boot/dts/marvell/rd-ac5x.dts | 74 +++++ drivers/pinctrl/mvebu/Kconfig | 4 + drivers/pinctrl/mvebu/Makefile | 1 + drivers/pinctrl/mvebu/pinctrl-ac5.c | 261 +++++++++++++++ 8 files changed, 717 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml create mode 100644 arch/arm64/boot/dts/marvell/armada-98dx2530.dtsi create mode 100644 arch/arm64/boot/dts/marvell/rd-ac5x.dts create mode 100644 drivers/pinctrl/mvebu/pinctrl-ac5.c -- 2.35.1
