Re: [PATCH v1 1/8] ARM: dts: imx6qdl-vicut1/vicutgo: Set default backlight brightness to maximum

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 6, 2022 at 9:23 AM Shawn Guo <shawnguo@xxxxxxxxxx> wrote:
>
> On Mon, Feb 21, 2022 at 10:53:05AM +0100, Oleksij Rempel wrote:
> > From: David Jander <david@xxxxxxxxxxx>
> >
> > Recover default behavior of the device and set maximal brightness
> >
> > Signed-off-by: David Jander <david@xxxxxxxxxxx>
> > Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/imx6dl-victgo.dts   | 2 +-
> >  arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 2 +-
> >  2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
> > index 227c952543d4..e6134efbfabd 100644
> > --- a/arch/arm/boot/dts/imx6dl-victgo.dts
> > +++ b/arch/arm/boot/dts/imx6dl-victgo.dts
> > @@ -28,7 +28,7 @@ backlight: backlight {
> >               pwms = <&pwm1 0 5000000 0>;
> >               brightness-levels = <0 16 64 255>;
> >               num-interpolated-steps = <16>;
> > -             default-brightness-level = <1>;
> > +             default-brightness-level = <48>;
>
> Please take a look at the documentation of the property.
>
>   default-brightness-level:
>     description:
>       The default brightness level (index into the array defined by the
>       "brightness-levels" property).

Ah, never mind, I missed 'num-interpolated-steps' there.

Shawn



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux