Use the correct PCI clock bindings.
Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 6aa0eb463647..f71416be29a7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -595,7 +595,7 @@
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
- clocks = <&clk IMX8MM_CLK_DUMMY>;
+ clocks = <&pcie0_refclk>;
status = "okay";
};
@@ -604,8 +604,8 @@
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
- <&clk IMX8MM_CLK_DUMMY>, <&pcie0_refclk>;
- clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
<&clk IMX8MM_CLK_PCIE1_CTRL>;
assigned-clock-rates = <10000000>, <250000000>;
--
2.17.1
