The GW71xx, GW72xx and GW73xx boards have USB1 routed to a USB OTG connectors and USB2 routed to a USB hub. The OTG connector has a over-currently protection with an active-low pin and the USB1 to HUB connection has no over-current protection (as the HUB itself implements this for its downstream ports). Add proper dt nodes to specify the over-current pin polarity for USB1 and disable over-current protection for USB2. Fixes: 6f30b27c5ef5 ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx> --- v2: add gw71xx as well --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi | 2 ++ arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi | 2 ++ arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 2 ++ 3 files changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi index 73addc0b8e57..6671b99177e5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -146,12 +146,14 @@ &usbotg1 { dr_mode = "otg"; + over-current-active-low; vbus-supply = <®_usb_otg1_vbus>; status = "okay"; }; &usbotg2 { dr_mode = "host"; + disable-over-current; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index 1e7badb2a82e..b6b3578a0f89 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -211,12 +211,14 @@ &usbotg1 { dr_mode = "otg"; + over-current-active-low; vbus-supply = <®_usb_otg1_vbus>; status = "okay"; }; &usbotg2 { dr_mode = "host"; + disable-over-current; vbus-supply = <®_usb_otg2_vbus>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index 7a5d45e80982..89fc2c595056 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -239,12 +239,14 @@ &usbotg1 { dr_mode = "otg"; + over-current-active-low; vbus-supply = <®_usb_otg1_vbus>; status = "okay"; }; &usbotg2 { dr_mode = "host"; + disable-over-current; vbus-supply = <®_usb_otg2_vbus>; status = "okay"; }; -- 2.17.1