Introduce MDIO bus frequency support. This way the board can have a faster (or maybe slower) bus frequency than the hardware default. changes since v2: - resend, no RFC anymore, because net-next is open again changes since v1: - fail probe if clock-frequency is set, but not clock is given - rename clk_freq to bus_freq - add maxItems to interrupts property - put compatible and reg first in the example Michael Walle (3): dt-bindings: net: convert mscc-miim to YAML format dt-bindings: net: mscc-miim: add clock and clock-frequency net: phy: mscc-miim: add support to set MDIO bus frequency .../devicetree/bindings/net/mscc,miim.yaml | 61 +++++++++++++++++++ .../devicetree/bindings/net/mscc-miim.txt | 26 -------- drivers/net/mdio/mdio-mscc-miim.c | 58 +++++++++++++++++- 3 files changed, 117 insertions(+), 28 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/mscc,miim.yaml delete mode 100644 Documentation/devicetree/bindings/net/mscc-miim.txt -- 2.30.2