Quoting Shaik Sajida Bhanu (2022-03-17 08:49:25)
> Add gcc hardware reset entries for eMMC and SD card.
>
> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index c07765d..cd50ea3 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -881,6 +881,10 @@
> mmc-hs400-1_8v;
> mmc-hs400-enhanced-strobe;
>
> + /* gcc hardware reset entry for eMMC */
Please don't add this worthless comment.
> + resets = <&gcc GCC_SDCC1_BCR>;
> + reset-names = "core_reset";
A "_reset" postfix is redundant. In fact, reset-names shouldn't even be
required.
> +
> sdhc1_opp_table: opp-table {
> compatible = "operating-points-v2";
>
> @@ -2686,6 +2690,10 @@
>
> qcom,dll-config = <0x0007642c>;
>
> + /* gcc hardware reset entry for SD card */
Please don't add this worthless comment.
> + resets = <&gcc GCC_SDCC2_BCR>;
> + reset-names = "core_reset";
> +
> sdhc2_opp_table: opp-table {
> compatible = "operating-points-v2";
>
