Convert the Qualcomm Shared Memory State Machine to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/soc/qcom/qcom,smsm.txt | 104 -------------
.../bindings/soc/qcom/qcom,smsm.yaml | 138 ++++++++++++++++++
2 files changed, 138 insertions(+), 104 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
deleted file mode 100644
index 2993b5a97dd6..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-Qualcomm Shared Memory State Machine
-
-The Shared Memory State Machine facilitates broadcasting of single bit state
-information between the processors in a Qualcomm SoC. Each processor is
-assigned 32 bits of state that can be modified. A processor can through a
-matrix of bitmaps signal subscription of notifications upon changes to a
-certain bit owned by a certain remote processor.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,smsm"
-
-- qcom,ipc-N:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: three entries specifying the outgoing ipc bit used for
- signaling the N:th remote processor
- - phandle to a syscon node representing the apcs registers
- - u32 representing offset to the register within the syscon
- - u32 representing the ipc bit within the register
-
-- qcom,local-host:
- Usage: optional
- Value type: <u32>
- Definition: identifier of the local processor in the list of hosts, or
- in other words specifier of the column in the subscription
- matrix representing the local processor
- defaults to host 0
-
-- #address-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 1
-
-- #size-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 0
-
-= SUBNODES
-Each processor's state bits are described by a subnode of the smsm device node.
-Nodes can either be flagged as an interrupt-controller to denote a remote
-processor's state bits or the local processors bits. The node names are not
-important.
-
-- reg:
- Usage: required
- Value type: <u32>
- Definition: specifies the offset, in words, of the first bit for this
- entry
-
-- #qcom,smem-state-cells:
- Usage: required for local entry
- Value type: <u32>
- Definition: must be 1 - denotes bit number
-
-- interrupt-controller:
- Usage: required for remote entries
- Value type: <empty>
- Definition: marks the entry as a interrupt-controller and the state bits
- to belong to a remote processor
-
-- #interrupt-cells:
- Usage: required for remote entries
- Value type: <u32>
- Definition: must be 2 - denotes bit number and IRQ flags
-
-- interrupts:
- Usage: required for remote entries
- Value type: <prop-encoded-array>
- Definition: one entry specifying remote IRQ used by the remote processor
- to signal changes of its state bits
-
-
-= EXAMPLE
-The following example shows the SMEM setup for controlling properties of the
-wireless processor, defined from the 8974 apps processor's point-of-view. It
-encompasses one outbound entry and the outgoing interrupt for the wireless
-processor.
-
-smsm {
- compatible = "qcom,smsm";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- qcom,ipc-3 = <&apcs 8 19>;
-
- apps_smsm: apps@0 {
- reg = <0>;
-
- #qcom,smem-state-cells = <1>;
- };
-
- wcnss_smsm: wcnss@7 {
- reg = <7>;
- interrupts = <0 144 1>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml
new file mode 100644
index 000000000000..a40d7fa13325
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smsm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory State Machine
+
+maintainers:
+ - Andy Gross <agross@xxxxxxxxxx>
+ - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
+
+description:
+ The Shared Memory State Machine facilitates broadcasting of single bit state
+ information between the processors in a Qualcomm SoC. Each processor is
+ assigned 32 bits of state that can be modified. A processor can through a
+ matrix of bitmaps signal subscription of notifications upon changes to a
+ certain bit owned by a certain remote processor.
+
+properties:
+ compatible:
+ const: qcom,smsm
+
+ '#address-cells':
+ const: 1
+
+ qcom,local-host:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+ description:
+ Identifier of the local processor in the list of hosts, or in other words
+ specifier of the column in the subscription matrix representing the local
+ processor.
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^qcom,ipc-[1-4]$":
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to a syscon node representing the APCS registers
+ - description: u32 representing offset to the register within the syscon
+ - description: u32 representing the ipc bit within the register
+ description:
+ Three entries specifying the outgoing ipc bit used for signaling the N:th
+ remote processor.
+
+ "^.*@[0-9a-f]$":
+ type: object
+ description:
+ Each processor's state bits are described by a subnode of the SMSM device
+ node. Nodes can either be flagged as an interrupt-controller to denote a
+ remote processor's state bits or the local processors bits. The node
+ names are not important.
+
+ properties:
+ reg:
+ maxItems: 1
+
+ interrupt-controller:
+ description:
+ Marks the entry as a interrupt-controller and the state bits to
+ belong to a remote processor.
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ maxItems: 1
+ description:
+ One entry specifying remote IRQ used by the remote processor to
+ signal changes of its state bits.
+
+ '#qcom,smem-state-cells':
+ $ref: /schemas/types.yaml#/definitions/uint32
+ const: 1
+ description:
+ Required for local entry. Denotes bit number.
+
+ required:
+ - reg
+
+ oneOf:
+ - required:
+ - '#qcom,smem-state-cells'
+ - required:
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupts
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#size-cells'
+
+anyOf:
+ - required:
+ - qcom,ipc-1
+ - required:
+ - qcom,ipc-2
+ - required:
+ - qcom,ipc-3
+ - required:
+ - qcom,ipc-4
+
+additionalProperties: false
+
+examples:
+ # The following example shows the SMEM setup for controlling properties of
+ # the wireless processor, defined from the 8974 apps processor's
+ # point-of-view. It encompasses one outbound entry and the outgoing interrupt
+ # for the wireless processor.
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ shared-memory {
+ compatible = "qcom,smsm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ qcom,ipc-3 = <&apcs 8 19>;
+
+ apps_smsm: apps@0 {
+ reg = <0>;
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcnss_smsm: wcnss@7 {
+ reg = <7>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
--
2.32.0
