Correct grammar in 'enable-gpios' description and remove useless comment about regulator nodes, because these are obvious from patternProperties. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Changes since v1: 1. Correct also "spefied" --- .../bindings/regulator/richtek,rt4801-regulator.yaml | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml index 235e593b3b2c..4a4dfa7d9d09 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml @@ -17,9 +17,6 @@ description: | Datasheet is available at https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf -#The valid names for RT4801 regulator nodes are: -#DSVP, DSVN - properties: compatible: enum: @@ -33,8 +30,8 @@ properties: The first one is ENP to enable DSVP, and second one is ENM to enable DSVN. Number of GPIO in the array list could be 1 or 2. If only one gpio is specified, only one gpio used to control ENP/ENM. - Else both are spefied, DSVP/DSVN could be controlled individually. - Othersie, this property not specified. treat both as always-on regulator. + Else if both are specified, DSVP/DSVN could be controlled individually. + If this property not specified, treat both as always-on regulators. minItems: 1 maxItems: 2 -- 2.32.0
