Define phy-mode of the Broadcom switch's port@5 as rgmii. This doesn't seem
to matter but let's explicitly define it since phy-mode as rgmii is defined
on the other side which is port@6 of the Realtek switch.
Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
---
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
index cf793c558437..5696dd5fbaf4 100644
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -205,6 +205,7 @@ port@4 {
sw0_p5: port@5 {
reg = <5>;
label = "extsw";
+ phy-mode = "rgmii";
fixed-link {
speed = <1000>;
--
2.25.1
