On Wed, 10 Sep 2014 17:07:02 +0200
Johan Hovold <johan@xxxxxxxxxx> wrote:
> On Wed, Sep 10, 2014 at 03:20:19PM +0200, Boris BREZILLON wrote:
> > On Wed, 10 Sep 2014 14:14:24 +0200
> > Johan Hovold <johan@xxxxxxxxxx> wrote:
>
> > > This does not describe the hardware, but rather a specific software
> > > configuration.
> > >
> > > The RTT is first of all not an RTC (although it can be used as one in a
> > > specific software configuration). And the second register resource above
> > > is not an RTT register, but a general-purpose backup register could be
> > > used for other purposes (which register to use is currently configurable
> > > for legacy booting using CONFIG_RTC_DRV_AT91SAM9_GPBR).
> >
> > We could use a syscon device (which exposes a regmap) for the GPBR
> > block.
> >
> > rtc@ffffff20 {
>
> rtt
>
> > compatible = "atmel,at91sam9260-rtt";
> > reg = <0xfffffd20 0x10>;
> > interrupts = <1 4 7>;
> > clocks = <&clk32k>;
> > atmel,time-reg = <&gpbr 0x0>;
> > };
> >
> > gpbr: syscon@fffffd50 {
> > compatible = "atmel,at91sam9260-gpbr", "syscon";
> > reg = <0xfffffd50 0x10>;
> >
> > };
>
> Yes, this essentially what I suggested in the thread (and my last reply)
> and relying on syscon rather than a custom driver seems like a good
> idea. It would allow early access to the registers too with the recently
> proposed changes. It would not guarantee any kind of exclusivity,
> though, but I guess that's tolerable?
Yep, that's one of the concern I had with the syscon/regmap
approach :-(, but I guess I'll give this solution a try and post a new
version of this series ;-).
Can we just leave the rtt as an rtc problem on the side for now and bind
it to the rtc-at91sam9 driver.
If we ever decide to add a new driver using the RTT for another purpose
we will still be able to reference the RTT block like this (and keep
the existing rtt node definition):
rtt-based-rtc {
compatible = "atmel,rtt-rtc";
atmel,rtt = <&rtt>;
atmel,time-reg = <&gpbr 0x0>;
}
rtt-based-xdev {
compatible = "atmel,rtt-xdev";
atmel,rtt = <&rtt>;
/*...*/
}
Regards,
Boris
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
