On Wed, 10 Sep 2014 14:14:24 +0200
Johan Hovold <johan@xxxxxxxxxx> wrote:
> On Wed, Sep 03, 2014 at 10:45:34AM +0200, Boris BREZILLON wrote:
> > Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> > new file mode 100644
> > index 0000000..9ca455f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> > @@ -0,0 +1,20 @@
> > +Atmel AT91SAM9260 Real Time Timer
> > +
> > +Required properties:
> > +- compatible: should be: "atmel,at91sam9260-rtt"
> > +- reg: should contain 2 memory regions
> > + * the first one encodes the memory region of the RTT controller
> > + * the second one encodes the GPBR (General Purpose Backup Resgisters)
> > + memory region used to store the current time
> > +- interrupts: rtc alarm/event interrupt
> > +- clocks: should contain one clock pointing the the slow clk
> > +
> > +Example:
> > +
> > +rtc@fffffe00 {
> > + compatible = "atmel,at91sam9260-rtt";
> > + reg = <0xfffffd20 0x10
> > + 0xfffffd50 0x4>;
> > + interrupts = <1 4 7>;
> > + clocks = <&clk32k>;
> > +};
>
> This does not describe the hardware, but rather a specific software
> configuration.
>
> The RTT is first of all not an RTC (although it can be used as one in a
> specific software configuration). And the second register resource above
> is not an RTT register, but a general-purpose backup register could be
> used for other purposes (which register to use is currently configurable
> for legacy booting using CONFIG_RTC_DRV_AT91SAM9_GPBR).
We could use a syscon device (which exposes a regmap) for the GPBR
block.
rtc@ffffff20 {
compatible = "atmel,at91sam9260-rtt";
reg = <0xfffffd20 0x10>;
interrupts = <1 4 7>;
clocks = <&clk32k>;
atmel,time-reg = <&gpbr 0x0>;
};
gpbr: syscon@fffffd50 {
compatible = "atmel,at91sam9260-gpbr", "syscon";
reg = <0xfffffd50 0x10>;
};
>
> This was discussed in the thread where I posted an RFC for this last
> year (which you linked to in your original submission thread), but no
> conclusion was reached:
>
> http://www.spinics.net/lists/arm-kernel/msg236292.html
>
> Johan
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
