[PATCH v6 7/8] drm/msm/dp: Support edp/dp without hpd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some eDP sinks or platform boards will not support hpd.
This patch adds support for those cases.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@xxxxxxxxxxx>
---
 drivers/gpu/drm/msm/dp/dp_catalog.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
index 1809ce2..8f1fc71 100644
--- a/drivers/gpu/drm/msm/dp/dp_catalog.c
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
@@ -244,10 +244,17 @@ void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog)
 
 int dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog *dp_catalog)
 {
-	u32 state;
+	u32 state, hpd_en;
 	struct dp_catalog_private *catalog = container_of(dp_catalog,
 				struct dp_catalog_private, dp_catalog);
 
+	hpd_en = dp_read_aux(catalog, REG_DP_DP_HPD_CTRL);
+	hpd_en &= DP_DP_HPD_CTRL_HPD_EN;
+
+	/* no-hpd case */
+	if (!hpd_en)
+		return 0;
+
 	/* poll for hpd connected status every 2ms and timeout after 500ms */
 	return readl_poll_timeout(catalog->io->dp_controller.aux.base +
 				REG_DP_DP_HPD_INT_STATUS,
@@ -586,8 +593,10 @@ void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog)
 	reftimer |= DP_DP_HPD_REFTIMER_ENABLE;
 	dp_write_aux(catalog, REG_DP_DP_HPD_REFTIMER, reftimer);
 
-	/* Enable HPD */
-	dp_write_aux(catalog, REG_DP_DP_HPD_CTRL, DP_DP_HPD_CTRL_HPD_EN);
+	/* Enable HPD if supported*/
+	if (!of_property_read_bool(catalog->dev->of_node, "no-hpd"))
+		dp_write_aux(catalog, REG_DP_DP_HPD_CTRL,
+				DP_DP_HPD_CTRL_HPD_EN);
 }
 
 u32 dp_catalog_link_is_connected(struct dp_catalog *dp_catalog)
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux