On 04.03.2022 17:35, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Add all the SPI nodes for the flexcom IP block. Keep them
> disabled by default.
>
> Signed-off-by: Michael Walle <michael@xxxxxxxx>
Reviewed-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/lan966x.dtsi | 75 ++++++++++++++++++++++++++++++++++
> 1 file changed, 75 insertions(+)
>
> diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
> index d7eacb0144f5..a61d394ad04d 100644
> --- a/arch/arm/boot/dts/lan966x.dtsi
> +++ b/arch/arm/boot/dts/lan966x.dtsi
> @@ -105,6 +105,21 @@ usart0: serial@200 {
> atmel,fifo-size = <32>;
> status = "disabled";
> };
> +
> + spi0: spi@400 {
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
> + <&dma0 AT91_XDMAC_DT_PERID(2)>;
> + dma-names = "tx", "rx";
> + clocks = <&nic_clk>;
> + clock-names = "spi_clk";
> + atmel,fifo-size = <32>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> flx1: flexcom@e0044000 {
> @@ -128,6 +143,21 @@ usart1: serial@200 {
> atmel,fifo-size = <32>;
> status = "disabled";
> };
> +
> + spi1: spi@400 {
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
> + <&dma0 AT91_XDMAC_DT_PERID(4)>;
> + dma-names = "tx", "rx";
> + clocks = <&nic_clk>;
> + clock-names = "spi_clk";
> + atmel,fifo-size = <32>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> trng: rng@e0048000 {
> @@ -168,6 +198,21 @@ usart2: serial@200 {
> atmel,fifo-size = <32>;
> status = "disabled";
> };
> +
> + spi2: spi@400 {
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
> + <&dma0 AT91_XDMAC_DT_PERID(6)>;
> + dma-names = "tx", "rx";
> + clocks = <&nic_clk>;
> + clock-names = "spi_clk";
> + atmel,fifo-size = <32>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> flx3: flexcom@e0064000 {
> @@ -191,6 +236,21 @@ usart3: serial@200 {
> atmel,fifo-size = <32>;
> status = "disabled";
> };
> +
> + spi3: spi@400 {
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
> + <&dma0 AT91_XDMAC_DT_PERID(8)>;
> + dma-names = "tx", "rx";
> + clocks = <&nic_clk>;
> + clock-names = "spi_clk";
> + atmel,fifo-size = <32>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> dma0: dma-controller@e0068000 {
> @@ -233,6 +293,21 @@ usart4: serial@200 {
> atmel,fifo-size = <32>;
> status = "disabled";
> };
> +
> + spi4: spi@400 {
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
> + <&dma0 AT91_XDMAC_DT_PERID(10)>;
> + dma-names = "tx", "rx";
> + clocks = <&nic_clk>;
> + clock-names = "spi_clk";
> + atmel,fifo-size = <32>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> timer0: timer@e008c000 {
> --
> 2.30.2
>
