Hi Mikhail,
csharper2005@xxxxxxxxx wrote on Tue, 29 Mar 2022 12:20:16 +0000:
> This adds an MTD partition parser for the Sercomm partition table that
> is used in some Beeline, Netgear and Sercomm routers.
>
> The Sercomm partition map table contains real partition offsets, which
> may differ from device to device depending on the number and location of
> bad blocks on NAND.
>
> Device tree example:
> partitions {
> compatible = "sercomm,sc-partitions", "fixed-partitions";
> #address-cells = <1>;
> #size-cells = <1>;
>
> partition@0 {
> label = "u-boot";
> reg = <0x0 0x100000>;
> scpart-id = <0>;
> read-only;
> };
> };
You'll need a DT binding patch and Rob's ack!
>
> This is essentially the same code as proposed by NOGUCHI Hiroshi
> <drvlabo@xxxxxxxxx> here:
I would credit Hiroshi with a Suggested-by at least
> https://github.com/openwrt/openwrt/pull/1318#issuecomment-420607394
And use a Link: tag for this.
>
> Signed-off-by: Mikhail Zhilkin <csharper2005@xxxxxxxxx>
> ---
Thanks,
Miquèl
