[PATCH] dt-bindings: PCI: uniphier: Convert uniphier-pcie.txt to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert the file into a JSON description at the yaml format.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
---
 .../bindings/pci/socionext,uniphier-pcie.yaml | 100 ++++++++++++++++++
 .../devicetree/bindings/pci/uniphier-pcie.txt |  82 --------------
 MAINTAINERS                                   |   2 +-
 3 files changed, 101 insertions(+), 83 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
 delete mode 100644 Documentation/devicetree/bindings/pci/uniphier-pcie.txt

diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
new file mode 100644
index 000000000000..57176f62f955
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe host controller
+
+description: |
+  UniPhier PCIe host controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pcie
+
+  reg:
+    minItems: 3
+    maxItems: 4
+
+  reg-names:
+    oneOf:
+      - items:
+          - const: dbi
+          - const: link
+          - const: config
+      - items:
+          - const: dbi
+          - const: link
+          - const: config
+          - const: atu
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  num-viewport: true
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pcie: pcie@66000000 {
+        compatible = "socionext,uniphier-pcie";
+        reg-names = "dbi", "link", "config";
+        reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        clocks = <&sys_clk 24>;
+        resets = <&sys_rst 24>;
+        num-lanes = <1>;
+        num-viewport = <1>;
+        bus-range = <0x0 0xff>;
+        device_type = "pci";
+        ranges = <0x81000000 0 0x00000000  0x2ffe0000  0 0x00010000>,
+                 <0x82000000 0 0x00000000  0x20000000  0 0x0ffe0000>;
+        phy-names = "pcie-phy";
+        phys = <&pcie_phy>;
+        #interrupt-cells = <1>;
+        interrupt-names = "dma", "msi";
+        interrupts = <0 224 4>, <0 225 4>;
+        interrupt-map-mask = <0 0 0  7>;
+        interrupt-map = <0 0 0  1  &pcie_intc 0>,
+                        <0 0 0  2  &pcie_intc 1>,
+                        <0 0 0  3  &pcie_intc 2>,
+                        <0 0 0  4  &pcie_intc 3>;
+
+        pcie_intc: legacy-interrupt-controller {
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&gic>;
+            interrupts = <0 226 4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
deleted file mode 100644
index 359585db049f..000000000000
--- a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Socionext UniPhier PCIe host controller bindings
-
-This describes the devicetree bindings for PCIe host controller implemented
-on Socionext UniPhier SoCs.
-
-UniPhier PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and inherits
-common properties defined in
-Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
-
-Required properties:
-- compatible: Should be "socionext,uniphier-pcie".
-- reg: Specifies offset and length of the register set for the device.
-	According to the reg-names, appropriate register sets are required.
-- reg-names: Must include the following entries:
-    "dbi"    - controller configuration registers
-    "link"   - SoC-specific glue layer registers
-    "config" - PCIe configuration space
-    "atu"    - iATU registers for DWC version 4.80 or later
-- clocks: A phandle to the clock gate for PCIe glue layer including
-	the host controller.
-- resets: A phandle to the reset line for PCIe glue layer including
-	the host controller.
-- interrupts: A list of interrupt specifiers. According to the
-	interrupt-names, appropriate interrupts are required.
-- interrupt-names: Must include the following entries:
-    "dma" - DMA interrupt
-    "msi" - MSI interrupt
-
-Optional properties:
-- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate
-	phys are required.
-- phy-names: Must be "pcie-phy".
-
-Required sub-node:
-- legacy-interrupt-controller: Specifies interrupt controller for legacy PCI
-	interrupts.
-
-Required properties for legacy-interrupt-controller:
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- interrupt-parent: Phandle to the parent interrupt controller.
-- interrupts: An interrupt specifier for legacy interrupt.
-
-Example:
-
-	pcie: pcie@66000000 {
-		compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
-		status = "disabled";
-		reg-names = "dbi", "link", "config";
-		reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
-		      <0x2fff0000 0x10000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		clocks = <&sys_clk 24>;
-		resets = <&sys_rst 24>;
-		num-lanes = <1>;
-		num-viewport = <1>;
-		bus-range = <0x0 0xff>;
-		device_type = "pci";
-		ranges =
-		/* downstream I/O */
-			<0x81000000 0 0x00000000  0x2ffe0000  0 0x00010000
-		/* non-prefetchable memory */
-			 0x82000000 0 0x00000000  0x20000000  0 0x0ffe0000>;
-		#interrupt-cells = <1>;
-		interrupt-names = "dma", "msi";
-		interrupts = <0 224 4>, <0 225 4>;
-		interrupt-map-mask = <0 0 0  7>;
-		interrupt-map = <0 0 0  1  &pcie_intc 0>,	/* INTA */
-				<0 0 0  2  &pcie_intc 1>,	/* INTB */
-				<0 0 0  3  &pcie_intc 2>,	/* INTC */
-				<0 0 0  4  &pcie_intc 3>;	/* INTD */
-
-		pcie_intc: legacy-interrupt-controller {
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&gic>;
-			interrupts = <0 226 4>;
-		};
-	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 4cc47b2dbdc9..c1d377be991c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15337,7 +15337,7 @@ PCIE DRIVER FOR SOCIONEXT UNIPHIER
 M:	Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
 L:	linux-pci@xxxxxxxxxxxxxxx
 S:	Maintained
-F:	Documentation/devicetree/bindings/pci/uniphier-pcie*
+F:	Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
 F:	drivers/pci/controller/dwc/pcie-uniphier*
 
 PCIE DRIVER FOR ST SPEAR13XX
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux