[PATCH 1/5] dt-bindings: pci: Add ARTPEC-8 PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add description to support Axis, ARTPEC-8 SoC.
ARTPEC-8 is the SoC platform of Axis Communications
and PCIe controller is designed based on Design-Ware PCIe controller.

Signed-off-by: Wangseok Lee <wangseok.lee@xxxxxxxxxxx>
---
 .../bindings/pci/axis,artpec8-pcie-ep.yaml         | 110 +++++++++++++++++++
 .../devicetree/bindings/pci/axis,artpec8-pcie.yaml | 117 +++++++++++++++++++++
 2 files changed, 227 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml

diff --git a/Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml
new file mode 100644
index 0000000..dc66965
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/axis,artpec8-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARTPEC-8 SoC PCIe Controller Device Tree Bindings
+
+maintainers:
+  - Jesper Nilsson <jesper.nilsson@xxxxxxxx>
+
+description: |+
+  This PCIe end-point controller is based on the Synopsys DesignWare PCIe IP
+  and thus inherits all the common properties defined in snps,dw-pcie-ep.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+
+properties:
+  compatible:
+    const: axis,artpec8-pcie-ep
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: Data Bus Interface (DBI2) registers.
+      - description: PCIe address space region.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: addr_space
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PIPE clock, used by the controller to clock the PIPE
+      - description: PCIe dbi clock, ungated version
+      - description: PCIe master clock, ungated version
+      - description: PCIe slave clock, ungated version
+
+  clock-names:
+    items:
+      - const: pipe_clk
+      - const: dbi_clk
+      - const: mstr_clk
+      - const: slv_clk
+
+  phys:
+    maxItems: 1
+
+  num-lanes:
+    const: 2
+
+required:
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - num-lanes
+  - bus-range
+  - interrupts
+  - interrupt-names
+  - samsung,fsys-sysreg
+  - samsung,syscon-phandle
+  - samsung,syscon-bus-s-fsys
+  - samsung,syscon-bus-p-fsys
+  - phys
+  - phy-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    artec8 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie_ep: pcie-ep@17200000 {
+            compatible = "axis,artpec8-pcie-ep";
+            clocks = <&clock_cmu_fsys 39>,
+                        <&clock_cmu_fsys 38>,
+                        <&clock_cmu_fsys 37>,
+                        <&clock_cmu_fsys 36>;
+            clock-names = "pipe_clk", "dbi_clk", "mstr_clk", "slv_clk";
+            reg = <0x0 0x17200000 0x0 0x1000>,
+                    <0x0 0x17201000 0x0 0x1000>,
+                    <0x2 0x00000000 0x6 0x00000000>;
+            reg-names = "dbi", "dbi2", "addr_space";
+            num-lanes = <2>;
+            bus-range = <0x00 0xff>;
+            interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "intr";
+            #interrupt-cells = <1>;
+            num-ib-windows = <16>;
+            num-ob-windows = <16>;
+            samsung,fsys-sysreg = <&syscon_fsys>;
+            samsung,syscon-phandle = <&pmu_system_controller>;
+            samsung,syscon-bus-s-fsys = <&syscon_bus_s_fsys>;
+            samsung,syscon-bus-p-fsys = <&syscon_bus_p_fsys>;
+            phys = <&pcie_phy>;
+            phy-names = "pcie_phy";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml
new file mode 100644
index 0000000..b2cff0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/axis,artpec8-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Artpec-8 SoC PCIe Controller Device Tree Bindings
+
+maintainers:
+  - Jesper Nilsson <jesper.nilsson@xxxxxxxx>
+
+description: |+
+  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+  and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: axis,artpec8-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: External Local Bus interface (ELBI) registers.
+      - description: PCIe configuration space region.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: elbi
+      - const: config
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PIPE clock, used by the controller to clock the PIPE
+      - description: PCIe dbi clock, ungated version
+      - description: PCIe master clock,  ungated version
+      - description: PCIe slave clock, ungated version
+
+  clock-names:
+    items:
+      - const: pipe_clk
+      - const: dbi_clk
+      - const: mstr_clk
+      - const: slv_clk
+
+  phys:
+    maxItems: 1
+
+  num-lanes:
+    const: 2
+
+required:
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - device_type
+  - ranges
+  - num-lanes
+  - bus-range
+  - interrupts
+  - interrupt-names
+  - samsung,fsys-sysreg
+  - samsung,syscon-phandle
+  - samsung,syscon-bus-s-fsys
+  - samsung,syscon-bus-p-fsys
+  - phys
+  - phy-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    artec8 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie: pcie@17200000 {
+            compatible = "axis,artpec8-pcie";
+            reg = <0x0 0x17200000 0x0 0x1000>,
+                    <0x0 0x16ca0000 0x0 0x2000>,
+                    <0x7 0x0001e000 0x0 0x2000>;
+            reg-names = "dbi", "elbi", "config";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            ranges = </* non-prefetchable memory */
+                            0x83000000 0x0 0x0000000 0x2 0x00000000 0x5 0x00000000
+                            /* downstream I/O */
+                            0x81000000 0x0 0x0000000 0x7 0x00000000 0x0 0x00010000>;
+            num-lanes = <2>;
+            bus-range = <0x00 0xff>;
+            interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "intr";
+            #interrupt-cells = <1>;
+            samsung,fsys-sysreg = <&syscon_fsys>;
+            samsung,syscon-phandle = <&pmu_system_controller>;
+            samsung,syscon-bus-s-fsys = <&syscon_bus_s_fsys>;
+            samsung,syscon-bus-p-fsys = <&syscon_bus_p_fsys>;
+            clocks = <&cmu_fsys 39>,
+                        <&cmu_fsys 38>,
+                        <&cmu_fsys 37>,
+                        <&cmu_fsys 36>;
+            clock-names = "pipe_clk", "dbi_clk", "mstr_clk", "slv_clk";
+            phys = <&pcie_phy>;
+            phy-names = "pcie_phy";
+        };
+    };
+...
-- 
2.9.5



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux