On Tue, Mar 22, 2022 at 07:18:34PM +0200, Avi Fishman wrote:
> On Fri, Mar 4, 2022 at 10:42 PM Jonathan Neuschäfer
> <j.neuschaefer@xxxxxxx> wrote:
> >
> > Hello,
> >
> > On Thu, Mar 03, 2022 at 04:15:18PM +0200, Andy Shevchenko wrote:
> > > On Thu, Mar 03, 2022 at 02:54:27PM +0200, Tali Perry wrote:
> > > > > On Thu, Mar 03, 2022 at 04:31:38PM +0800, Tyrone Ting wrote:
> > > > > > From: Tyrone Ting <kfting@xxxxxxxxxxx>
> > > > > >
> > > > > > Use ioread8 instead of ioread32 to access the SMBnCTL3 register since
> > > > > > the register is only 8-bit wide.
> > > > >
> > > > > > Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
> > > > >
> > > > > No, this is bad commit message, since you have bitwise masks and there is
> > > > > nothing to fix from functional point of view. So, why is this a fix?
> > > > >
> > > >
> > > > The next gen of this device is a 64 bit cpu.
> > > > The module is and was 8 bit.
> > > >
> > > > The ioread32 that seemed to work smoothly on a 32 bit machine
> > > > was causing a panic on a 64 bit machine.
> > > > since the module is 8 bit we changed to ioread8.
> > > > This is working both for the 32 and 64 CPUs with no issue.
> > >
> > > Then the commit message is completely wrong here.
> >
> > I disagree: The commit message is perhaps incomplete, but not wrong.
> > The SMBnCTL3 register was specified as 8 bits wide in the datasheets of
> > multiple chip generations, as far as I can tell, but the driver wrongly
> > made a 32-bit access, which just happened not to blow up.
> >
> > So, indeed, "since the register is only 8-bit wide" seems to be a
> > correct claim.
> >
> > > And provide necessary (no need to have noisy commit messages)
> > > bits of the oops to show what's going on
> >
> > I guess it's blowing up now because SMBnCTL3 isn't 32-bit aligned
> > (being at offset 0x0e in the controller).
> >
>
> Hi Andy,
> After this clarification can you please acknowledge this specific patch?
> If you think there is a better way to describe this, can you propose one?
To be honest, I think it's probably best to include all the necessary
explanations in the next version of this patch, i.e.:
- That the register was always defined as 8-bit in the datasheets,
and so the 32-bit access was always incorrect, but simply didn't
cause a visible error
- How the 32-bit access caused an error now, perhaps with a trimmed
Oops log as Andy suggested
Jonathan
Attachment:
signature.asc
Description: PGP signature
