On Fri, Mar 4, 2022 at 10:42 PM Jonathan Neuschäfer
<j.neuschaefer@xxxxxxx> wrote:
>
> Hello,
>
> On Thu, Mar 03, 2022 at 04:15:18PM +0200, Andy Shevchenko wrote:
> > On Thu, Mar 03, 2022 at 02:54:27PM +0200, Tali Perry wrote:
> > > > On Thu, Mar 03, 2022 at 04:31:38PM +0800, Tyrone Ting wrote:
> > > > > From: Tyrone Ting <kfting@xxxxxxxxxxx>
> > > > >
> > > > > Use ioread8 instead of ioread32 to access the SMBnCTL3 register since
> > > > > the register is only 8-bit wide.
> > > >
> > > > > Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
> > > >
> > > > No, this is bad commit message, since you have bitwise masks and there is
> > > > nothing to fix from functional point of view. So, why is this a fix?
> > > >
> > >
> > > The next gen of this device is a 64 bit cpu.
> > > The module is and was 8 bit.
> > >
> > > The ioread32 that seemed to work smoothly on a 32 bit machine
> > > was causing a panic on a 64 bit machine.
> > > since the module is 8 bit we changed to ioread8.
> > > This is working both for the 32 and 64 CPUs with no issue.
> >
> > Then the commit message is completely wrong here.
>
> I disagree: The commit message is perhaps incomplete, but not wrong.
> The SMBnCTL3 register was specified as 8 bits wide in the datasheets of
> multiple chip generations, as far as I can tell, but the driver wrongly
> made a 32-bit access, which just happened not to blow up.
>
> So, indeed, "since the register is only 8-bit wide" seems to be a
> correct claim.
>
> > And provide necessary (no need to have noisy commit messages)
> > bits of the oops to show what's going on
>
> I guess it's blowing up now because SMBnCTL3 isn't 32-bit aligned
> (being at offset 0x0e in the controller).
>
Hi Andy,
After this clarification can you please acknowledge this specific patch?
If you think there is a better way to describe this, can you propose one?
>
> Jonathan
--
Regards,
Avi
