On Sat, Sep 06, 2014 at 10:48:44PM +0200, Arnaud Ebalard wrote: > Hi, > > Following Ben's report and fix for RN102, I did some tests > on RN104 and RN2120 (they have the same Hynix H27U1G8F2BTR > flash and setup) and came up w/ the exact same fixes for > their respective .dts files. With those patches, it is now > possible to update kernel from userland and u-boot will > happily load and boot it on those devices. > > Both patches should be candidates for stable, I guess. > > Cheers, > > a+ > > Arnaud Ebalard (2): > ARM: mvebu: Netgear RN104: Use Hardware BCH ECC > ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC > > arch/arm/boot/dts/armada-370-netgear-rn104.dts | 4 ++++ > arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 4 ++++ > 2 files changed, 8 insertions(+) I've applied both patches to mvebu/fixes and flagged them for stable, v3.14+. I removed the 'Depends' line from each, as Thomas mentioned, there is no build dependency between these dts changes and the code supporting it (as it should be). thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
