On 19/03/2022 02:50, Tony Huang wrote: > Add mmc yaml file for Sunplus SP7021 > > Signed-off-by: Tony Huang <tonyhuang.sunplus@xxxxxxxxx> > --- > Changes in v4: > - Addressed comments from Ulf Hansson. > > .../devicetree/bindings/mmc/sunplus,mmc.yaml | 79 ++++++++++++++++++++++ > MAINTAINERS | 6 ++ > 2 files changed, 85 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml > > diff --git a/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml > new file mode 100644 > index 0000000..13ed07c > --- /dev/null > +++ b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml > @@ -0,0 +1,79 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) Sunplus Ltd. Co. 2021 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mmc/sunplus,mmc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: sunplus MMC controller s/sunplus/Sunplus/ > + > +allOf: > + - $ref: "mmc-controller.yaml" allOf below maintainers, > + > +maintainers: > + - Tony Huang <tonyhuang.sunplus@xxxxxxxxx> > + - Li-hao Kuo <lhjeff911@xxxxxxxxx> > + > +properties: > + compatible: > + enum: > + - sunplus,mmc-v1 > + - sunplus,mmc-v2 How did this happen? Versions of blocks are usually discouraged, unless you have clear specification,. The previous discussion did not end with "add v1 and v2". Do you have clear documentation/specification of these blocks? If no, please use SoC compatibles. > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + minItems: 1 maxItems > + > + resets: > + maxItems: 1 > + > + max-frequency: true > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - resets > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + mmc0: mmc@9c003b00 { > + compatible = "sunplus,mmc-v2"; > + reg = <0x9c003b00 0x180>; > + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clkc 0x4e>; > + resets = <&rstc 0x3e>; > + bus-width = <8>; > + max-frequency = <52000000>; > + non-removable; > + disable-wp; > + cap-mmc-highspeed; > + mmc-ddr-3_3v; > + no-sdio; > + no-sd; > + }; > + > + mmc1: mmc@9c003e80 { > + compatible = "sunplus,mmc-v1"; > + reg = <0x9c003e80 0x280>; > + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clkc 0x4f>; > + resets = <&rstc 0x3f>; > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc1_mux &mmc1_mux_cd>; > + max-frequency = <52000000>; > + disable-wp; > + cap-sd-highspeed; > + no-sdio; > + no-mmc; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index fb18ce7..2d91431 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -18242,6 +18242,12 @@ L: netdev@xxxxxxxxxxxxxxx > S: Maintained > F: drivers/net/ethernet/dlink/sundance.c > > +SUNPLUS MMC DRIVER > +M: Tony Huang <tonyhuang.sunplus@xxxxxxxxx> > +M: Li-hao Kuo <lhjeff911@xxxxxxxxx> Wrong indentation. > +S: Maintained > +F: Documentation/devicetree/bindings/mmc/sunplu,mmc.yaml Wrong file name. > + > SUPERH > M: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx> > M: Rich Felker <dalias@xxxxxxxx> Best regards, Krzysztof
