The labels on the spidev nodes are not used and not required, so
remove them. The TX28 supports 3 chipselects on the SPI
interface. Make all those chipselects available to the user.
Signed-off-by: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx28-tx28.dts | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index f947fbb..4e790c2 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -619,17 +619,23 @@
clock-frequency = <57600000>;
status = "okay";
- spidev0: spi@0 {
+ spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <57600000>;
};
- spidev1: spi@1 {
+ spi@1 {
compatible = "spidev";
reg = <1>;
spi-max-frequency = <57600000>;
};
+
+ spi@2 {
+ compatible = "spidev";
+ reg = <2>;
+ spi-max-frequency = <57600000>;
+ };
};
&usb0 {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
