Signed-off-by: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx28-tx28.dts | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 4e790c2..cfe6b31 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -37,7 +37,7 @@
onewire {
compatible = "w1-gpio";
- gpios = <&gpio2 7 0>;
+ gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@@ -52,7 +52,7 @@
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio0 18 0>;
+ gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -62,7 +62,7 @@
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 27 0>;
+ gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -90,7 +90,7 @@
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 0 0>;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
};
@@ -101,7 +101,7 @@
regulator-name = "LCD POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 31 0>;
+ gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -111,7 +111,7 @@
regulator-name = "LCD RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 30 0>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
startup-delay-us = <300000>;
enable-active-high;
regulator-always-on;
@@ -143,7 +143,7 @@
user_led: user {
label = "Heartbeat";
- gpios = <&gpio4 10 0>;
+ gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
@@ -172,16 +172,16 @@
matrix_keypad: matrix-keypad@0 {
compatible = "gpio-matrix-keypad";
col-gpios = <
- &gpio5 0 0
- &gpio5 1 0
- &gpio5 2 0
- &gpio5 3 0
+ &gpio5 0 GPIO_ACTIVE_HIGH
+ &gpio5 1 GPIO_ACTIVE_HIGH
+ &gpio5 2 GPIO_ACTIVE_HIGH
+ &gpio5 3 GPIO_ACTIVE_HIGH
>;
row-gpios = <
- &gpio5 4 0
- &gpio5 5 0
- &gpio5 6 0
- &gpio5 7 0
+ &gpio5 4 GPIO_ACTIVE_HIGH
+ &gpio5 5 GPIO_ACTIVE_HIGH
+ &gpio5 6 GPIO_ACTIVE_HIGH
+ &gpio5 7 GPIO_ACTIVE_HIGH
>;
/* sample keymap */
linux,keymap = <
@@ -284,8 +284,8 @@
pinctrl-0 = <&tx28_edt_ft5x06_pins>;
interrupt-parent = <&gpio2>;
interrupts = <5 0>;
- reset-gpios = <&gpio2 6 1>;
- wake-gpios = <&gpio4 9 0>;
+ reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
};
touchscreen: tsc2007@48 {
@@ -295,7 +295,7 @@
pinctrl-0 = <&tx28_tsc2007_pins>;
interrupt-parent = <&gpio3>;
interrupts = <20 0>;
- pendown-gpio = <&gpio3 20 1>;
+ pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = /bits/ 16 <660>;
};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
