Hi Krzysztof, On Tue, Mar 15, 2022 at 08:32:58AM +0100, Krzysztof Kozlowski wrote: > On 14/03/2022 17:27, Jacopo Mondi wrote: > > Provide the bindings documentation for Omnivision OV5670 image sensor. > > > > Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx> > > > > --- > > v1->v2 (comments from Krzysztof) > > > > - Rename to include manufacturer name > > - Add entry to MAINTAINERS > > - Add maxItems: to -gpios properties > > - Use common clock properties > > - Use enum: [1, 2] for data lanes > > - Fix whitespace issue in example > > --- > > > > .../bindings/media/i2c/ovti,ov5670.yaml | 99 +++++++++++++++++++ > > MAINTAINERS | 1 + > > 2 files changed, 100 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml > > new file mode 100644 > > index 000000000000..73cf72203f17 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml > > @@ -0,0 +1,99 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5670.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Omnivision OV5670 5 Megapixels raw image sensor > > + > > +maintainers: > > + - Jacopo Mondi <jacopo@xxxxxxxxxx> > > + > > +description: |- > > + The OV5670 is a 5 Megapixels raw image sensor which provides images in 10-bits > > + RAW BGGR Bayer format on a 2 data lanes MIPI CSI-2 serial interface and is > > + controlled through an I2C compatible control bus. > > + > > +properties: > > + compatible: > > + const: ovti,ov5670 > > + > > + reg: > > + maxItems: 1 > > + > > + assigned-clocks: true > > + assigned-clock-parents: true > > + assigned-clock-rates: true > > You should not need these. These are coming with schema. You can add > these to example schema below and double-check. > Thanks, I'll try removing and see how it works > > + > > + clocks: > > + description: System clock. From 6 to 27 MHz. > > + maxItems: 1 > > + > > + pwdn-gpios: > > + description: Reference to the GPIO connected to the PWDNB pin. Active low. > > This does not look like a standard property, so you need a vendor prefix. > $ git grep powerdown-gpio arch/arm*/boot/dts | wc -l 48 $ git grep pwdn-gpio arch/arm*/boot/dts | wc -l 5 I'll go with the majority. I wonder however if 'standard' proeprties are documented somewhere. Thanks j > > + maxItems: 1 > > + > > Best regards, > Krzysztof
