Typical GPIO lines like enable, powerdown, reset or wakeup are not documented as common, which leads to new variations of these (e.g. pwdn-gpios). Add a common schema which serves also as a documentation for preferred naming. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> --- .../bindings/gpio/gpio-consumer-common.yaml | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml diff --git a/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml new file mode 100644 index 000000000000..098dc913f9e5 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-consumer-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common GPIO lines + +maintainers: + - Bartosz Golaszewski <brgl@xxxxxxxx> + - Linus Walleij <linus.walleij@xxxxxxxxxx> + +# do not select this schema for GPIO hogs +select: + properties: + gpio-hog: false + +properties: + enable-gpios: + $ref: /schemas/types.yaml#/definitions/phandle-array + + reset-gpios: + $ref: /schemas/types.yaml#/definitions/phandle-array + + powerdown-gpios: + $ref: /schemas/types.yaml#/definitions/phandle-array + + pwdn-gpios: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Use powerdown-gpios + deprecated: true + + wakeup-gpios: + $ref: /schemas/types.yaml#/definitions/phandle-array + +additionalProperties: true -- 2.32.0
