Add binding for the leadtek ltk035c5444t, which is a 640x480 mipi-dbi over spi / 24-bit RGB panel based on the newvision NV03052C chipset. It is found in the Anbernic RG350M mips handheld. Signed-off-by: Christophe Branchereau <cbranchereau@xxxxxxxxx> --- .../display/panel/leadtek,ltk035c5444t.yaml | 59 +++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml new file mode 100644 index 000000000000..817a9bed7d5a --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel + +maintainers: + - Paul Cercueil <paul@xxxxxxxxxxxxxxx> + - Christophe Branchereau <cbranchereau@xxxxxxxxx> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: leadtek,ltk035c5444t + + backlight: true + port: true + power-supply: true + reg: true + reset-gpios: true + +required: + - compatible + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "leadtek,ltk035c5444t"; + reg = <0>; + + spi-3wire; + spi-max-frequency = <3125000>; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; -- 2.35.1
