From: Jesse Taube <mr.bossman075@xxxxxxxxx>
Include clock and reset macros and replace magic numbers.
Signed-off-by: Jesse Taube <Mr.Bossman075@xxxxxxxxx>
Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx>
Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
arch/arm/boot/dts/suniv-f1c100s.dtsi | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index def830101448..922efd5e9457 100644
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -4,6 +4,9 @@
* Copyright 2018 Mesih Kilinc <mesihkilinc@xxxxxxxxx>
*/
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -82,7 +85,7 @@ pio: pinctrl@1c20800 {
compatible = "allwinner,suniv-f1c100s-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <38>, <39>, <40>;
- clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -116,8 +119,8 @@ uart0: serial@1c25000 {
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 38>;
- resets = <&ccu 24>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
@@ -127,8 +130,8 @@ uart1: serial@1c25400 {
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 39>;
- resets = <&ccu 25>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
@@ -138,8 +141,8 @@ uart2: serial@1c25800 {
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 40>;
- resets = <&ccu 26>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
};
--
2.25.1
