Convert the TPS62360 regulator binding to DT schema format using json-schema. Signed-off-by: Georgi Vlaev <g-vlaev@xxxxxx> --- .../bindings/regulator/ti,tps62360.yaml | 99 +++++++++++++++++++ .../bindings/regulator/tps62360-regulator.txt | 44 --------- 2 files changed, 99 insertions(+), 44 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps62360.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/tps62360-regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml new file mode 100644 index 000000000000..73674ef4d903 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps62360.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TPS6236x Voltage Regulators + +maintainers: + - Laxman Dewangan <ldewangan@xxxxxxxxxx> + +description: | + The TPS6236x are a family of step down dc-dc converter with + an input voltage range of 2.5V to 5.5V. The devices provide + up to 3A peak load current, and an output voltage range of + 0.77V to 1.4V (TPS62360/62) and 0.5V to 1.77V (TPS62361B/63). + + Datasheet is available at: + https://www.ti.com/lit/gpn/tps62360 + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + enum: + - ti,tps62360 + - ti,tps62361 + - ti,tps62362 + - ti,tps62363 + + reg: + maxItems: 1 + + ti,vsel0-gpio: + description: | + GPIO for controlling VSEL0 line. If this property + is missing, then assume that there is no GPIO for + VSEL0 control. + maxItems: 1 + + ti,vsel1-gpio: + description: | + GPIO for controlling VSEL1 line. If this property + is missing, then assume that there is no GPIO for + VSEL1 control. + maxItems: 1 + + ti,enable-vout-discharge: + description: Enable output discharge. + type: boolean + + ti,enable-pull-down: + description: Enable pull down. + type: boolean + + ti,vsel0-state-high: + description: | + Initial state of VSEL0 input is high. If this property + is missing, then assume the state as low. + type: boolean + + ti,vsel1-state-high: + description: | + Initial state of VSEL1 input is high. If this property + is missing, then assume the state as low. + type: boolean + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + ti,vsel0-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; + ti,vsel1-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; + ti,vsel0-state-high; + ti,vsel1-state-high; + ti,enable-pull-down; + ti,enable-force-pwm; + ti,enable-vout-discharge; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt deleted file mode 100644 index 1b20c3dbcdb8..000000000000 --- a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt +++ /dev/null @@ -1,44 +0,0 @@ -TPS62360 Voltage regulators - -Required properties: -- compatible: Must be one of the following. - "ti,tps62360" - "ti,tps62361", - "ti,tps62362", - "ti,tps62363", -- reg: I2C slave address - -Optional properties: -- ti,enable-vout-discharge: Enable output discharge. This is boolean value. -- ti,enable-pull-down: Enable pull down. This is boolean value. -- ti,vsel0-gpio: GPIO for controlling VSEL0 line. - If this property is missing, then assume that there is no GPIO - for vsel0 control. -- ti,vsel1-gpio: Gpio for controlling VSEL1 line. - If this property is missing, then assume that there is no GPIO - for vsel1 control. -- ti,vsel0-state-high: Initial state of vsel0 input is high. - If this property is missing, then assume the state as low (0). -- ti,vsel1-state-high: Initial state of vsel1 input is high. - If this property is missing, then assume the state as low (0). - -Any property defined as part of the core regulator binding, defined in -regulator.txt, can also be used. - -Example: - - abc: tps62360 { - compatible = "ti,tps62361"; - reg = <0x60>; - regulator-name = "tps62361-vout"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on - ti,vsel0-gpio = <&gpio1 16 0>; - ti,vsel1-gpio = <&gpio1 17 0>; - ti,vsel0-state-high; - ti,vsel1-state-high; - ti,enable-pull-down; - ti,enable-force-pwm; - ti,enable-vout-discharge; - }; -- 2.30.2
