Hi Dmitry,
On Thu, 3 Mar 2022 at 02:29, Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> On Wed, 2 Mar 2022 at 23:31, Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx> wrote:
> >
> > SA8155p ADP board supports the PCIe0 controller in the RC
> > mode (only). So add the support for the same.
> >
> > Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > Cc: Vinod Koul <vkoul@xxxxxxxxxx>
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 42 ++++++++++++++++++++++++
> > 1 file changed, 42 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> > index 8756c2b25c7e..3f6b3ee404f5 100644
> > --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> > +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> > @@ -387,9 +387,51 @@ &usb_2_qmpphy {
> > vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
> > };
> >
> > +&pcie0 {
> > + status = "okay";
> > +};
> > +
> > +&pcie0_phy {
> > + status = "okay";
> > + vdda-phy-supply = <&vreg_l18c_0p88>;
> > + vdda-pll-supply = <&vreg_l8c_1p2>;
> > +};
> > +
> > +&pcie1_phy {
> > + vdda-phy-supply = <&vreg_l18c_0p88>;
> > + vdda-pll-supply = <&vreg_l8c_1p2>;
> > +};
> > +
> > &tlmm {
> > gpio-reserved-ranges = <0 4>;
> >
> > + bt_en_default: bt_en_default {
> > + mux {
> > + pins = "gpio172";
> > + function = "gpio";
> > + };
> > +
> > + config {
> > + pins = "gpio172";
> > + drive-strength = <2>;
> > + bias-pull-down;
> > + };
> > + };
> > +
> > + wlan_en_default: wlan_en_default {
> > + mux {
> > + pins = "gpio169";
> > + function = "gpio";
> > + };
> > +
> > + config {
> > + pins = "gpio169";
> > + drive-strength = <16>;
> > + output-high;
> > + bias-pull-up;
> > + };
> > + };
> > +
>
> Not related to PCIe
Hmm.. I have no strong personal opinion on this, so let's see what
Bjorn thinks about the same.
My reasoning for keeping it here was to just capture that we have
'bt_en' and 'wlan_en' related tlmm details here, so that when you send
out the reworked QCAxxxx mfd series (see [1]) later, I can easily plug
it in for SA8155p ADP dts as well with the 'bt' and 'wlan' constructs.
[1]. https://lore.kernel.org/lkml/20210621223141.1638189-2-dmitry.baryshkov@xxxxxxxxxx/T/
Regards.
Bhupesh
> > usb2phy_ac_en1_default: usb2phy_ac_en1_default {
> > mux {
> > pins = "gpio113";
> > --
> > 2.35.1
> >
>
>
> --
> With best wishes
> Dmitry
