Il 22/02/22 11:07, Nancy.Lin ha scritto:
Add vdosys1 RDMA definition.
Signed-off-by: Nancy.Lin <nancy.lin@xxxxxxxxxxxx>
---
.../arm/mediatek/mediatek,mdp-rdma.yaml | 77 +++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp-rdma.yaml
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp-rdma.yaml
new file mode 100644
index 000000000000..d70b81ec1914
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp-rdma.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mdp-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MDP RDMA
+
+maintainers:
+ - Matthias Brugger <matthias.bgg@xxxxxxxxx>
+
+description: |
+ The mediatek MDP RDMA stands for Read Direct Memory Access.
+ It provides real time data to the back-end panel driver, such as DSI,
+ DPI and DP_INTF.
+ It contains one line buffer to store the sufficient pixel data.
+ RDMA device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: mediatek,mt8195-vdo1-rdma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: RDMA Clock
+
+ iommus:
+ description:
+ This property should point to the respective IOMMU block with master port as argument,
+ see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+ mediatek,gce-client-reg:
+ description:
+ The register of display function block to be set by gce. There are 4 arguments,
+ such as gce node, subsys id, offset and register size. The subsys id that is
+ mapping to the register of display function blocks is defined in the gce header
+ include/include/dt-bindings/gce/<chip>-gce.h of each chips.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - clocks
+ - iommus
+
+additionalProperties: false
+
+examples:
+ - |
You're missing a couple of header inclusions and relying on the default
address-cells, size-cells, which is wrong here, as you have two of both.
#include .........
soc {
#address-cells = <2>;
#size-cells = <2>;
vdo1_rdma0: .......
+
+ vdo1_rdma0: vdo1_rdma@1c104000 {
+ compatible = "mediatek,mt8195-vdo1-rdma";
+ reg = <0 0x1c104000 0 0x1000>;
+ interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+ iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
+ mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+ };
+
