This series adds support for the ST glue logic which wraps the DWC3 controller on STiH407 SoC family chipsets. Changes since v5 - Use of_platform_depopulate Changes since v4 - Fix bug with setting bits in usb control register - Remove superflous '\n' - Change default Kconfig to make default same as other platforms - Update dt doc example so that both usb2 and usb3 phys are using generic drivers/phy instead of drivers/usb/phy - Reconfigure ST glue logic regs in resume callback Changes since v3 - Various formating nits Changes since v2 - Use dr_mode for host/device static configuration - Manage shared reset signal to usbss to avoid hang if probing before usb3 phy - Remove DT checks and make driver depend on OF - Change some #define to use BIT macro - Make some comments clearer - Use kerneldoc for struct documentation - Remove udelay - Let DT create platform_devices, and remove legacy alloc - Change some logging levels to dev_dbg - Various whitespace and formatting cleanup - Use SIMPLE_DEV_PM_OPS() - Add const to of_device struct - Reorder header files alphabetically - Use devm_ioremap_resource instead of devm_request_and_ioremap - Remove of_match_ptr() Changes since v1 - Fix Kconfig mistake Peter Griffin (3): usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture Documentation/devicetree/bindings/usb/dwc3-st.txt | 68 ++++ MAINTAINERS | 1 + drivers/usb/dwc3/Kconfig | 9 + drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/dwc3-st.c | 377 ++++++++++++++++++++++ 5 files changed, 456 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/dwc3-st.txt create mode 100644 drivers/usb/dwc3/dwc3-st.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
