[PATCH 1/2] adv7604: Add support for i2c_new_secondary_device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The ADV7604 has thirteen 256-byte maps that can be accessed via the main
I²C ports. Each map has it own I²C address and acts
as a standard slave device on the I²C bus.

If nothing is defined, it uses default addresses.
The main purpose is using two adv76xx on the same i2c bus.

Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
---
 .../devicetree/bindings/media/i2c/adv7604.txt      | 17 ++++++-
 drivers/media/i2c/adv7604.c                        | 53 ++++++++++++++--------
 2 files changed, 48 insertions(+), 22 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index c27cede..8486b5c 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -10,8 +10,12 @@ Required Properties:
 
   - compatible: Must contain one of the following
     - "adi,adv7611" for the ADV7611
+    - "adi,adv7604" for the ADV7604
 
-  - reg: I2C slave address
+  - reg: I2C slave addresses
+    The ADV7604 has thirteen 256-byte maps that can be accessed via the main
+    I²C ports. Each map has it own I²C address and acts
+    as a standard slave device on the I²C bus.
 
   - hpd-gpios: References to the GPIOs that control the HDMI hot-plug
     detection pins, one per HDMI input. The active flag indicates the GPIO
@@ -32,6 +36,12 @@ The digital output port node must contain at least one endpoint.
 Optional Properties:
 
   - reset-gpios: Reference to the GPIO connected to the device's reset pin.
+  - reg-names : Names of maps with programmable addresses.
+		It can contain any map needing another address than default one.
+		Possible maps names are :
+ADV7604 : "main", "avlink", "cec", "infoframe", "esdp", "dpp", "afe", "rep",
+		"edid", "hdmi", "test", "cp", "vdp"
+ADV7611 : "main", "cec", "infoframe", "afe", "rep", "edid", "hdmi", "cp"
 
 Optional Endpoint Properties:
 
@@ -50,7 +60,10 @@ Example:
 
 	hdmi_receiver@4c {
 		compatible = "adi,adv7611";
-		reg = <0x4c>;
+		/* edid page will be accessible @ 0x66 on i2c bus */
+		/* other maps keep their default addresses */
+		reg = <0x4c 0x66>;
+		reg-names = "main", "edid";
 
 		reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
 		hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index d4fa213..8336c02 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -326,6 +326,22 @@ static const struct adv7604_video_standards adv7604_prim_mode_hdmi_gr[] = {
 	{ },
 };
 
+static const char const *adv7604_secondary_names[] = {
+	[ADV7604_PAGE_IO] = "main",
+	[ADV7604_PAGE_AVLINK] = "avlink",
+	[ADV7604_PAGE_CEC] = "cec",
+	[ADV7604_PAGE_INFOFRAME] = "infoframe",
+	[ADV7604_PAGE_ESDP] = "esdp",
+	[ADV7604_PAGE_DPP] = "dpp",
+	[ADV7604_PAGE_AFE] = "afe",
+	[ADV7604_PAGE_REP] = "rep",
+	[ADV7604_PAGE_EDID] = "edid",
+	[ADV7604_PAGE_HDMI] = "hdmi",
+	[ADV7604_PAGE_TEST] = "test",
+	[ADV7604_PAGE_CP] = "cp",
+	[ADV7604_PAGE_VDP] = "vdp"
+};
+
 /* ----------------------------------------------------------------------- */
 
 static inline struct adv7604_state *to_state(struct v4l2_subdev *sd)
@@ -2528,13 +2544,25 @@ static void adv7604_unregister_clients(struct adv7604_state *state)
 }
 
 static struct i2c_client *adv7604_dummy_client(struct v4l2_subdev *sd,
-							u8 addr, u8 io_reg)
+						unsigned int i)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct adv7604_platform_data *pdata = client->dev.platform_data;
+	unsigned int io_reg = 0xf2 + i;
+	unsigned int default_addr = io_read(sd, io_reg) >> 1;
+	struct i2c_client *new_client;
+
+	if (pdata && pdata->i2c_addresses[i])
+		new_client = i2c_new_dummy(client->adapter,
+					pdata->i2c_addresses[i]);
+	else
+		new_client = i2c_new_secondary_device(client,
+			adv7604_secondary_names[i], default_addr);
 
-	if (addr)
-		io_write(sd, io_reg, addr << 1);
-	return i2c_new_dummy(client->adapter, io_read(sd, io_reg) >> 1);
+	if (new_client)
+		io_write(sd, io_reg, new_client->addr << 1);
+
+	return new_client;
 }
 
 static const struct adv7604_reg_seq adv7604_recommended_settings_afe[] = {
@@ -2717,20 +2745,6 @@ static int adv7604_parse_dt(struct adv7604_state *state)
 	/* Disable the interrupt for now as no DT-based board uses it. */
 	state->pdata.int1_config = ADV7604_INT1_CONFIG_DISABLED;
 
-	/* Use the default I2C addresses. */
-	state->pdata.i2c_addresses[ADV7604_PAGE_AVLINK] = 0x42;
-	state->pdata.i2c_addresses[ADV7604_PAGE_CEC] = 0x40;
-	state->pdata.i2c_addresses[ADV7604_PAGE_INFOFRAME] = 0x3e;
-	state->pdata.i2c_addresses[ADV7604_PAGE_ESDP] = 0x38;
-	state->pdata.i2c_addresses[ADV7604_PAGE_DPP] = 0x3c;
-	state->pdata.i2c_addresses[ADV7604_PAGE_AFE] = 0x26;
-	state->pdata.i2c_addresses[ADV7604_PAGE_REP] = 0x32;
-	state->pdata.i2c_addresses[ADV7604_PAGE_EDID] = 0x36;
-	state->pdata.i2c_addresses[ADV7604_PAGE_HDMI] = 0x34;
-	state->pdata.i2c_addresses[ADV7604_PAGE_TEST] = 0x30;
-	state->pdata.i2c_addresses[ADV7604_PAGE_CP] = 0x22;
-	state->pdata.i2c_addresses[ADV7604_PAGE_VDP] = 0x24;
-
 	/* Hardcode the remaining platform data fields. */
 	state->pdata.disable_pwrdnb = 0;
 	state->pdata.disable_cable_det_rst = 0;
@@ -2891,8 +2905,7 @@ static int adv7604_probe(struct i2c_client *client,
 			continue;
 
 		state->i2c_clients[i] =
-			adv7604_dummy_client(sd, state->pdata.i2c_addresses[i],
-					     0xf2 + i);
+			adv7604_dummy_client(sd, i);
 		if (state->i2c_clients[i] == NULL) {
 			err = -ENOMEM;
 			v4l2_err(sd, "failed to create i2c client %u\n", i);
-- 
2.0.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux