On Thu, 24 Feb 2022 16:59:33 -0800, Dmitry Antipov wrote: > From: Dmitry Antipov <dmanti@xxxxxxxxxxxxx> > > Documentation describes the required and optional properties for > implementing Device Tree for a Microsoft G6 Touch Digitizer that > supports HID over SPI Protocol 1.0 specification. > > Signed-off-by: Dmitry Antipov <dmanti@xxxxxxxxxxxxx> > --- > .../input/microsoft,g6-touch-digitizer.yaml | 105 ++++++++++++++++++ > 1 file changed, 105 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.yaml:22:9: [warning] wrong indentation: expected 10 but found 8 (indentation) dtschema/dtc warnings/errors: Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dts:23.11-21: Warning (reg_format): /example-0/spi-hid-dev0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dts:21.22-37.11: Warning (unit_address_vs_reg): /example-0/spi-hid-dev0: node has a reg or ranges property, but no unit name Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1597405 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
