Use the power signal names as given in the schematics of the reference
board.
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
Changes since v1:
- swap buck1 and buck2
arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
index b4225cfcb6d9..2b685c0c7eeb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -41,7 +41,7 @@ pmic: pmic@25 {
regulators {
buck1: BUCK1{
- regulator-name = "BUCK1";
+ regulator-name = "VDD_SOC";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
@@ -50,7 +50,7 @@ buck1: BUCK1{
};
buck2: BUCK2 {
- regulator-name = "BUCK2";
+ regulator-name = "VDD_ARM_0V9";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
@@ -61,7 +61,7 @@ buck2: BUCK2 {
};
buck4: BUCK4{
- regulator-name = "BUCK4";
+ regulator-name = "VDD_3V3";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
@@ -69,7 +69,7 @@ buck4: BUCK4{
};
buck5: BUCK5{
- regulator-name = "BUCK5";
+ regulator-name = "VDD_1V8";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
@@ -77,7 +77,7 @@ buck5: BUCK5{
};
buck6: BUCK6 {
- regulator-name = "BUCK6";
+ regulator-name = "NVCC_DRAM_1V1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
@@ -85,7 +85,7 @@ buck6: BUCK6 {
};
ldo1: LDO1 {
- regulator-name = "LDO1";
+ regulator-name = "NVCC_SNVS_1V8";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -93,7 +93,7 @@ ldo1: LDO1 {
};
ldo2: LDO2 {
- regulator-name = "LDO2";
+ regulator-name = "VDD_SNVS_0V8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
@@ -101,7 +101,7 @@ ldo2: LDO2 {
};
ldo3: LDO3 {
- regulator-name = "LDO3";
+ regulator-name = "VDDA_1V8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -109,7 +109,7 @@ ldo3: LDO3 {
};
ldo4: LDO4 {
- regulator-name = "LDO4";
+ regulator-name = "VDD_PHY_1V2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -117,7 +117,7 @@ ldo4: LDO4 {
};
ldo5: LDO5 {
- regulator-name = "LDO5";
+ regulator-name = "NVCC_SD2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
--
2.30.2
