Re: [RFC][PATCH 1/2] dt-bindings: power: add Energy Model bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22-02-22, 11:03, Lukasz Luba wrote:
> OK, I misunderstood that. If that is possible than it would
> be great. I'm assuming you are taking about OPP v2.

Yes.

> I can relax the
> requirement that I need to provide this DT-EM for arm32, since they
> have a legacy OPP v1.

OPP V2 or V1 doesn't have anything to do with arm32/64. Anyone can implement the
newer V2 version (basically whoever wants something more than a simple freq/volt
pair). So arm32 SoC's that want to use the DT-EM thing, should migrate to
opp-v2, we can't support that with opp-v1.

> So we might have an entry similar that interconnect for the
> bandwidth, but for us it would be 'opp-power-uw'?

I will rather say similar to opp-microvolt or opp-microamp, so it better be
opp-microwatt.

> Let me have a look about some examples how that could be just
> added/extended in the opp table but from board file.
> If you have some handy link, I would be grateful.

The file I provided earlier:

arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts

This is updating opp-microvolt property of a single OPP node in the whole table.
Pretty much like this only.

-- 
viresh



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux