Hi Geert,
geert@xxxxxxxxxxxxxx wrote on Mon, 21 Feb 2022 10:16:24 +0100:
> Hi Miquel,
>
> On Fri, Feb 18, 2022 at 7:12 PM Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:
> > The dmamux register is located within the system controller.
> >
> > Without syscon, we need an extra helper in order to give write access to
> > this register to a dmamux driver.
> >
> > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
>
> Thanks for your patch!
>
> > --- a/drivers/clk/renesas/r9a06g032-clocks.c
> > +++ b/drivers/clk/renesas/r9a06g032-clocks.c
>
> Missing #include <linux/soc/renesas/r9a06g032-syscon.h>
>
> > @@ -315,6 +315,27 @@ struct r9a06g032_priv {
> > void __iomem *reg;
> > };
> >
> > +/* Exported helper to access the DMAMUX register */
> > +static struct r9a06g032_priv *syscon_priv;
>
> I'd call this sysctrl_priv, as that matches the bindings and
> binding header file name.
Ok.
>
> > +int r9a06g032_syscon_set_dmamux(u32 mask, u32 val)
> > +{
> > + u32 dmamux;
> > +
> > + if (!syscon_priv)
> > + return -EPROBE_DEFER;
> > +
> > + spin_lock(&syscon_priv->lock);
>
> This needs propection against interrupts => spin_lock_irqsave().
Yes.
>
> > +
> > + dmamux = readl(syscon_priv->reg + R9A06G032_SYSCON_DMAMUX);
> > + dmamux &= ~mask;
> > + dmamux |= val & mask;
> > + writel(dmamux, syscon_priv->reg + R9A06G032_SYSCON_DMAMUX);
> > +
> > + spin_unlock(&syscon_priv->lock);
> > +
> > + return 0;
> > +}
> > +
> > /* register/bit pairs are encoded as an uint16_t */
> > static void
> > clk_rdesc_set(struct r9a06g032_priv *clocks,
>
> > --- a/include/dt-bindings/clock/r9a06g032-sysctrl.h
> > +++ b/include/dt-bindings/clock/r9a06g032-sysctrl.h
> > @@ -145,4 +145,6 @@
> > #define R9A06G032_CLK_UART6 152
> > #define R9A06G032_CLK_UART7 153
> >
> > +#define R9A06G032_SYSCON_DMAMUX 0xA0
>
> I don't think this needs to be part of the bindings, so please move
> it to the driver source file.
I've moved it to the top of the file. There definitions are a bit mixed
with the code, I don't like this, so I kept it at the top.
>
> > --- /dev/null
> > +++ b/include/linux/soc/renesas/r9a06g032-syscon.h
>
> r9a06g032-sysctrl.h etc.
Done.
>
> > @@ -0,0 +1,11 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +#ifndef __LINUX_SOC_RENESAS_R9A06G032_SYSCON_H__
> > +#define __LINUX_SOC_RENESAS_R9A06G032_SYSCON_H__
> > +
> > +#ifdef CONFIG_CLK_R9A06G032
> > +int r9a06g032_syscon_set_dmamux(u32 mask, u32 val);
> > +#else
> > +static inline int r9a06g032_syscon_set_dmamux(u32 mask, u32 val) { return -ENODEV; }
> > +#endif
> > +
> > +#endif /* __LINUX_SOC_RENESAS_R9A06G032_SYSCON_H__ */
> > --
> > 2.27.0
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
Thanks,
Miquèl
