Am 2022-02-21 09:08, schrieb Kavyasree Kotagiri:
This patch adds basic DT for Microchip lan966x SoC and associated board
pcb8291(2-port EVB). Adds peripherals required to allow booting:
Interrupt
Controller, Clock, Generic ARMv7 Timers, Synopsys Timer, Flexcoms,
GPIOs.
Also adds other peripherals like crypto(AES/SHA), DMA, Watchdog Timer,
TRNG
and MCAN0.
Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@xxxxxxxxxxxxx>
---
v6 -> v7:
- Removed "arm,cpu-registers-not-fw-configured" property, as not
required.
- Corrected "PPI interrupt cpu mask" and order of interrupts.
v5 -> v6:
- Renamed dts file to lan966x-pcb8291.dts file.
- Disabled optional watchdog in dtsi file and enabled it in dts file.
v4 -> v5:
- Modified AES, SHA, TRNG node names as per generic names recommended.
v3 -> v4:
- Removed character 'x' from compatible string.
- Removed memory node as handled by bootloader.
- Renamed flexcom3 usart0 to usart3
- Added /chosen and /aliases nodes in dts file.
v2 -> v3:
- Enabling trng in dtsi itself.
- Removed "status=okay" dma0.
- Add gpio pin settings for can0(missed adding this in previous
version)
v1 -> v2:
- Moved flx3 usart0 node to dtsi file.
- Removed status="okay" for dma0 to maintain consistency across nodes
(which means enabling dma0 by default)
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/lan966x-pcb8291.dts | 64 +++++++
arch/arm/boot/dts/lan966x.dtsi | 237 ++++++++++++++++++++++++++
3 files changed, 303 insertions(+)
create mode 100644 arch/arm/boot/dts/lan966x-pcb8291.dts
create mode 100644 arch/arm/boot/dts/lan966x.dtsi
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x.dtsi - Device Tree Include file for Microchip LAN966 family
SoC
+ *
+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ * Author: Kavyasree Kotagiri <kavyasree.kotagiri@xxxxxxxxxxxxx>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/microchip,lan966x.h>
+
+/ {
+ model = "Microchip LAN966 family SoC";
+ compatible = "microchip,lan966";
As mentioned earlier, this isn't a documented compatible string. So,
I guess without overwriting this in the board dts it will throw an
error with the dt schema validator. OTOH, there are many dtsi files
in arch/arm/boot/dts/ doing this. I don't know what is correct here.
Everthing else looks good.
Reviewed-by: Michael Walle <michael@xxxxxxxx>
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ clock-frequency = <600000000>;
+ reg = <0x0>;
+ };
+ };
+
+ clocks {
+ sys_clk: sys_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <162500000>;
+ };
+
+ cpu_clk: cpu_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ };
+
+ ddr_clk: ddr_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <300000000>;
+ };
+
+ nic_clk: nic_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ };
+
+ clks: clock-controller@e00c00a8 {
+ compatible = "microchip,lan966x-gck";
+ #clock-cells = <1>;
+ clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+ clock-names = "cpu", "ddr", "sys";
+ reg = <0xe00c00a8 0x38>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <37500000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flx0: flexcom@e0040000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe0040000 0x100>;
+ clocks = <&clks GCK_ID_FLEXCOM0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0040000 0x800>;
+ status = "disabled";
+ };
+
+ flx1: flexcom@e0044000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe0044000 0x100>;
+ clocks = <&clks GCK_ID_FLEXCOM1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0044000 0x800>;
+ status = "disabled";
+ };
+
+ trng: rng@e0048000 {
+ compatible = "atmel,at91sam9g45-trng";
+ reg = <0xe0048000 0x100>;
+ clocks = <&nic_clk>;
+ };
+
+ aes: crypto@e004c000 {
+ compatible = "atmel,at91sam9g46-aes";
+ reg = <0xe004c000 0x100>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(13)>,
+ <&dma0 AT91_XDMAC_DT_PERID(12)>;
+ dma-names = "rx", "tx";
+ clocks = <&nic_clk>;
+ clock-names = "aes_clk";
+ };
+
+ flx2: flexcom@e0060000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe0060000 0x100>;
+ clocks = <&clks GCK_ID_FLEXCOM2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0060000 0x800>;
+ status = "disabled";
+ };
+
+ flx3: flexcom@e0064000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe0064000 0x100>;
+ clocks = <&clks GCK_ID_FLEXCOM3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0064000 0x800>;
+ status = "disabled";
+
+ usart3: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nic_clk>;
+ clock-names = "usart";
+ atmel,fifo-size = <32>;
+ status = "disabled";
+ };
+ };
+
+ dma0: dma-controller@e0068000 {
+ compatible = "microchip,sama7g5-dma";
+ reg = <0xe0068000 0x1000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&nic_clk>;
+ clock-names = "dma_clk";
+ };
+
+ sha: crypto@e006c000 {
+ compatible = "atmel,at91sam9g46-sha";
+ reg = <0xe006c000 0xec>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
+ dma-names = "tx";
+ clocks = <&nic_clk>;
+ clock-names = "sha_clk";
+ };
+
+ flx4: flexcom@e0070000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe0070000 0x100>;
+ clocks = <&clks GCK_ID_FLEXCOM4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0070000 0x800>;
+ status = "disabled";
+ };
+
+ timer0: timer@e008c000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xe008c000 0x400>;
+ clocks = <&nic_clk>;
+ clock-names = "timer";
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ watchdog: watchdog@e0090000 {
+ compatible = "snps,dw-wdt";
+ reg = <0xe0090000 0x1000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nic_clk>;
+ status = "disabled";
+ };
+
+ can0: can@e081c000 {
+ compatible = "bosch,m_can";
+ reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&clks GCK_ID_MCAN0>;
+ assigned-clock-rates = <40000000>;
+ bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ gpio: pinctrl@e2004064 {
+ compatible = "microchip,lan966x-pinctrl";
+ reg = <0xe2004064 0xb4>,
+ <0xe2010024 0x138>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&gpio 0 0 78>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ };
+
+ gic: interrupt-controller@e8c11000 {
+ compatible = "arm,gic-400", "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ reg = <0xe8c11000 0x1000>,
+ <0xe8c12000 0x2000>,
+ <0xe8c14000 0x2000>,
+ <0xe8c16000 0x2000>;
+ };
+ };
+};
--
-michael
