Add a node for the power domain controller found in MSM8226.
At the same time remove any existing usages of pm8226_s1 as this
regulator is now handled by power domains.
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts | 4 ---
arch/arm/boot/dts/qcom-msm8226.dtsi | 29 +++++++++++++++++++++
2 files changed, 29 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index 42467f705b26..2b7e52fda6a7 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -105,10 +105,6 @@ &rpm_requests {
pm8226-regulators {
compatible = "qcom,rpm-pm8226-regulators";
- pm8226_s1: s1 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1275000>;
- };
pm8226_s3: s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index e24e53438b4d..28eca15b5712 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -73,6 +73,35 @@ rpm {
rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8226";
qcom,smd-channels = "rpm_requests";
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8226-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <1>;
+ };
+ rpmpd_opp_svs_krait: opp2 {
+ opp-level = <2>;
+ };
+ rpmpd_opp_svs_soc: opp3 {
+ opp-level = <3>;
+ };
+ rpmpd_opp_nom: opp4 {
+ opp-level = <4>;
+ };
+ rpmpd_opp_turbo: opp5 {
+ opp-level = <5>;
+ };
+ rpmpd_opp_super_turbo: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
};
};
};
--
2.35.1
