L8150 uses LTR559 as a light and proximity sensor. Add it to the
devicetree.
Reviewed-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
---
.../boot/dts/qcom/msm8916-longcheer-l8150.dts | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 852de624f5af..b3836dde8a54 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -151,6 +151,21 @@ magnetometer@12 {
vddio-supply = <&pm8916_l6>;
};
+ light-sensor@23 {
+ compatible = "liteon,ltr559";
+ reg = <0x23>;
+ proximity-near-level = <75>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&light_int_default>;
+
+ vdd-supply = <&pm8916_l17>;
+ vio-supply = <&pm8916_l6>;
+ };
+
gyroscope@68 {
compatible = "bosch,bmg160";
reg = <0x68>;
@@ -392,6 +407,14 @@ gyro_int_default: gyro-int-default {
bias-disable;
};
+ light_int_default: light-int-default {
+ pins = "gpio115";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
magn_int_default: magn-int-default {
pins = "gpio113";
function = "gpio";
--
2.34.1
