Hi Alain
On 2/11/22 19:16, Alain Volmat wrote:
> Move the usb2_picophy1 and usb2_picophy2 nodes out of the soc section.
> Since they are controlled via syscfg, there is no reg property needed,
> which is required when having the node within the soc section.
>
> Signed-off-by: Alain Volmat <avolmat@xxxxxx>
> ---
> arch/arm/boot/dts/stih418.dtsi | 38 ++++++++++++++++------------------
> 1 file changed, 18 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
> index 97eda4392fbe..b35b9b7a7ccc 100644
> --- a/arch/arm/boot/dts/stih418.dtsi
> +++ b/arch/arm/boot/dts/stih418.dtsi
> @@ -26,31 +26,29 @@ cpu@3 {
> };
> };
>
> + usb2_picophy1: phy2 {
> + compatible = "st,stih407-usb2-phy";
> + #phy-cells = <0>;
> + st,syscfg = <&syscfg_core 0xf8 0xf4>;
> + resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
> + <&picophyreset STIH407_PICOPHY0_RESET>;
> + reset-names = "global", "port";
> + };
> +
> + usb2_picophy2: phy3 {
> + compatible = "st,stih407-usb2-phy";
> + #phy-cells = <0>;
> + st,syscfg = <&syscfg_core 0xfc 0xf4>;
> + resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
> + <&picophyreset STIH407_PICOPHY1_RESET>;
> + reset-names = "global", "port";
> + };
> +
> soc {
> rng11: rng@8a8a000 {
> status = "disabled";
> };
>
> - usb2_picophy1: phy2@0 {
> - compatible = "st,stih407-usb2-phy";
> - reg = <0 0>;
> - #phy-cells = <0>;
> - st,syscfg = <&syscfg_core 0xf8 0xf4>;
> - resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
> - <&picophyreset STIH407_PICOPHY0_RESET>;
> - reset-names = "global", "port";
> - };
> -
> - usb2_picophy2: phy3@0 {
> - compatible = "st,stih407-usb2-phy";
> - reg = <0 0>;
> - #phy-cells = <0>;
> - st,syscfg = <&syscfg_core 0xfc 0xf4>;
> - resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
> - <&picophyreset STIH407_PICOPHY1_RESET>;
> - reset-names = "global", "port";
> - };
> -
> ohci0: usb@9a03c00 {
> compatible = "st,st-ohci-300x";
> reg = <0x9a03c00 0x100>;
Reviewed-by: Patrice Chotard <patrice.chotard@xxxxxxxxxxx>
Thanks
Patrice
