Hi, I have a custom i.MX6 based board, but PMIC part is exactly the same as the Freescale SabreSD board. I have a reset button, which makes the PWRON signal on PFUZE100 go from 1 to 0. I thought this would reset the chip, and thus all voltages would go to 0, but this is not the case. It seems that SWxOMODE registers are involved in this process, accorgind to the datasheet, but I don't think this is implemented right now. I also removed regulator-always-on for my SW2 pin in order to get it off, but this has no effect. Thanks for your advices, JM -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
