On Wed, 3 Sep 2014 10:45:29 +0200 Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx> wrote: > Hello, > > This patch series adds DT support to the atmel at91sam9 RTC driver. > > It also removes any machine specific inclusions to prepare the migration > to multi platform kernel support, and retain the slow clock to prevent > the CCF from disabling it at the end of boot. Oops, just noticed there already was a proposal adding DT support to this driver [1]. Adding Johan and Douglas in Cc. [1]http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/160453.html > > Best Regards, > > Boris > > Boris BREZILLON (5): > rtc: at91sam9: remove references to mach specific headers > rtc: at91sam9: use standard readl/writel functions instead of raw > versions > rtc: at91sam9: add DT support > rtc: at91sam9: retain slow clock and check its rate > rtc: at91sam9: add DT bindings documentation > > .../devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 20 +++++++ > drivers/rtc/rtc-at91sam9.c | 63 +++++++++++++++++++--- > 2 files changed, 75 insertions(+), 8 deletions(-) > create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt > -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
