Re: [PATCH v14 8/9] [already applied to mips-fixes] MIPS: DTS: CI20: fix how ddc power is enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> Am 12.02.2022 um 15:58 schrieb Paul Cercueil <paul@xxxxxxxxxxxxxxx>:
> 
> Hi,
> 
> Le sam., févr. 12 2022 at 15:19:26 +0100, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> a écrit :
>> Originally we proposed a new hdmi-5v-supply regulator reference
>> for CI20 device tree but that was superseded by a better idea to use
>> the already defined "ddc-en-gpios" property of the "hdmi-connector".
>> Since "MIPS: DTS: CI20: Add DT nodes for HDMI setup" has already
>> been applied to v5.17-rc1, we add this on top.
>> Fixes: ae1b8d2c2de9 ("MIPS: DTS: CI20: Add DT nodes for HDMI setup")
>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>> Reviewed-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> 
> Since it's already applied you don't have to send this patch anymore.

I see, it has arrived in linux-next but not yet in drm-misc-next...
So if someone wants to test the series directly on top of drm-misc-next (as I am doing), it would be incomplete without.

IMHO these side-branches and partial merges here and there sometimes make more problems than they seem to solve...

But I leave already applied out commits for v15.

> 
> Cheers,
> -Paul
> 
>> ---
>> arch/mips/boot/dts/ingenic/ci20.dts | 15 ++-------------
>> 1 file changed, 2 insertions(+), 13 deletions(-)
>> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
>> index 3e336b3dbb109..ab6e3dc0bc1d0 100644
>> --- a/arch/mips/boot/dts/ingenic/ci20.dts
>> +++ b/arch/mips/boot/dts/ingenic/ci20.dts
>> @@ -83,6 +83,8 @@ hdmi_out: connector {
>> 		label = "HDMI OUT";
>> 		type = "a";
>> +		ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>;
>> +
>> 		port {
>> 			hdmi_con: endpoint {
>> 				remote-endpoint = <&dw_hdmi_out>;
>> @@ -114,17 +116,6 @@ otg_power: fixedregulator@2 {
>> 		gpio = <&gpf 14 GPIO_ACTIVE_LOW>;
>> 		enable-active-high;
>> 	};
>> -
>> -	hdmi_power: fixedregulator@3 {
>> -		compatible = "regulator-fixed";
>> -
>> -		regulator-name = "hdmi_power";
>> -		regulator-min-microvolt = <5000000>;
>> -		regulator-max-microvolt = <5000000>;
>> -
>> -		gpio = <&gpa 25 0>;
>> -		enable-active-high;
>> -	};
>> };
>> &ext {
>> @@ -576,8 +567,6 @@ &hdmi {
>> 	pinctrl-names = "default";
>> 	pinctrl-0 = <&pins_hdmi_ddc>;
>> -	hdmi-5v-supply = <&hdmi_power>;
>> -
>> 	ports {
>> 		#address-cells = <1>;
>> 		#size-cells = <0>;
>> --
>> 2.33.0
> 
> 





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux