Hi,
Le sam., févr. 12 2022 at 15:19:26 +0100, H. Nikolaus Schaller
<hns@xxxxxxxxxxxxx> a écrit :
Originally we proposed a new hdmi-5v-supply regulator reference
for CI20 device tree but that was superseded by a better idea to use
the already defined "ddc-en-gpios" property of the "hdmi-connector".
Since "MIPS: DTS: CI20: Add DT nodes for HDMI setup" has already
been applied to v5.17-rc1, we add this on top.
Fixes: ae1b8d2c2de9 ("MIPS: DTS: CI20: Add DT nodes for HDMI setup")
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
Reviewed-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Since it's already applied you don't have to send this patch anymore.
Cheers,
-Paul
---
arch/mips/boot/dts/ingenic/ci20.dts | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts
b/arch/mips/boot/dts/ingenic/ci20.dts
index 3e336b3dbb109..ab6e3dc0bc1d0 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -83,6 +83,8 @@ hdmi_out: connector {
label = "HDMI OUT";
type = "a";
+ ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>;
+
port {
hdmi_con: endpoint {
remote-endpoint = <&dw_hdmi_out>;
@@ -114,17 +116,6 @@ otg_power: fixedregulator@2 {
gpio = <&gpf 14 GPIO_ACTIVE_LOW>;
enable-active-high;
};
-
- hdmi_power: fixedregulator@3 {
- compatible = "regulator-fixed";
-
- regulator-name = "hdmi_power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpa 25 0>;
- enable-active-high;
- };
};
&ext {
@@ -576,8 +567,6 @@ &hdmi {
pinctrl-names = "default";
pinctrl-0 = <&pins_hdmi_ddc>;
- hdmi-5v-supply = <&hdmi_power>;
-
ports {
#address-cells = <1>;
#size-cells = <0>;
--
2.33.0
