Add base DTS file for pm8008 with infra and regulator nodes.
Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
---
Changes in V4:
- This is newly added in V4, to add all the pm8008 common stuff.
Changes in V5:
- Changed the mfd node names from pm8008_chip to pm8008_infra and
pm8008_ldo to pm8008_regulators as they re more appropriate.
- Changed the compatible for pm8008@9 mfd node to differentiate from
pm8008@8 node in driver.
- Removed compatible for regulators node.
- Removed reg property for LDOs and added in driver.
arch/arm64/boot/dts/qcom/pm8008.dtsi | 46 ++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi
diff --git a/arch/arm64/boot/dts/qcom/pm8008.dtsi b/arch/arm64/boot/dts/qcom/pm8008.dtsi
new file mode 100644
index 0000000..8e04983
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8008.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2021, The Linux Foundation. All rights reserved.
+
+pm8008_infra: pm8008@8 {
+ compatible = "qcom,pm8008";
+ reg = <0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
+
+pm8008_regulators: pm8008@9 {
+ compatible = "qcom,pm8008-regulators";
+ reg = <0x9>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulators {
+ pm8008_l1: LDO1 {
+ regulator-name = "pm8008_l1";
+ };
+
+ pm8008_l2: LDO2 {
+ regulator-name = "pm8008_l2";
+ };
+
+ pm8008_l3: LDO3 {
+ regulator-name = "pm8008_l3";
+ };
+
+ pm8008_l4: LDO4 {
+ regulator-name = "pm8008_l4";
+ };
+
+ pm8008_l5: LDO5 {
+ regulator-name = "pm8008_l5";
+ };
+
+ pm8008_l6: LDO6 {
+ regulator-name = "pm8008_l6";
+ };
+
+ pm8008_l7: LDO7 {
+ regulator-name = "pm8008_l7";
+ };
+ };
+};
--
2.7.4
