Hi Reinhold
On 12/9/21 11:49, reinhold.mueller@xxxxxxxxxxx wrote:
From: Reinhold Mueller <reinhold.mueller@xxxxxxxxxxx>
This patch series adds support for the emtrion emSBC-Argon
Changes
v2:
[PATCH 1/2]
- replaced enum by const
[PATCH 2/2]
- no fixes
v1:
[PATCH 0/2]
- split former patch in dts -and yaml patches
[PATCH 1/2]
- no fixes
[PATCH 2/2]
- small modification in subject name
- node name for leds moved to led-X
- update of clocknames removed,
already defined in stm32mp151.dtsi
- removing some unneeded entries status = "disabled"
- moved pin configurations to stm32mp15-pinctrl
Reinhold Mueller (2):
dt-binding: arm/stm32: Add emtrion hardware emSBC-Argon
ARM: dts: stm32: Add support for the emtrion emSBC-Argon
.../devicetree/bindings/arm/stm32/stm32.yaml | 6 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 92 +++
arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts | 53 ++
.../boot/dts/stm32mp157c-emstamp-argon.dtsi | 552 ++++++++++++++++++
5 files changed, 704 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
Thanks to add new STM32 board! Series applied on stm32-next.
Arnd,
This series introduces new dtbs_check errors mainly because it re-use
nodes from existing STM32 boards. I think it is acceptable to merge it
as it is not "new' errors but replication of existing errors.
Thanks
Alex
