DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete uart4 DMA property in stm32mp1-microdev2.0-of7 board device tree
to keep console in irq mode, as DMA support for console has been
removed from the driver by commit e359b4411c28 ("serial: stm32: fix
threaded interrupt handling").
Delete also uart8 DMA property to keep current behavior.
Signed-off-by: Erwan Le Ray <erwan.leray@xxxxxxxxxxx>
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
index 5670b23812a2..fae656edd820 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -143,6 +143,8 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -150,5 +152,7 @@
&uart8 {
pinctrl-names = "default";
pinctrl-0 = <&uart8_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
--
2.17.1
