DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete uart4 DMA property in stm32mp157a-iot-box board device tree to
keep console in irq mode, as DMA support for console has been removed
from the driver by commit e359b4411c28 ("serial: stm32: fix threaded
interrupt handling").
Signed-off-by: Erwan Le Ray <erwan.leray@xxxxxxxxxxx>
diff --git a/arch/arm/boot/dts/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
index 70f394b4d3c0..6a5a4af25bd9 100644
--- a/arch/arm/boot/dts/stm32mp157a-iot-box.dts
+++ b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
@@ -58,6 +58,8 @@
/delete-property/st,hw-flow-ctrl;
cts-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
bluetooth {
--
2.17.1
