On 02.02.22 21:32, Nishanth Menon wrote: > On 12:25-20220111, Matthias Schiffer wrote: >> All peripharals that require pinmuxing or other configuration to work >> should be disabled by default. Dependent DTS are adjusted accordingly. >> >> The following nodes are now "disabled" according to dtx_diff and were not >> overridden to "okay", as they define no pinctrl: >> >> k3-am654-base-board: >> - mcu_i2c0 >> - mcu_spi0..2 >> - cal >> - main_i2c3 >> - ehrpwm0..5 >> - main_uart1..2 >> - main_spi1..4 >> >> k3-am65-iot2050*: >> - mci_spi1..2 >> - cal >> - ehrpwm0..5 >> - main_spi0..4 >> >> Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx> > > > Jan: you ok with this series? Please ack. > Just rebased the still-too-long backlog to our system fully working over mainline. Basically looks good, but this might be a regression of the patch: [ 1.810083] OF: /bus@100000/pcie@5600000: phandle pcie-mode@4070 needs 1, found 0 ... [ 1.854840] OF: /bus@100000/pcie@5600000: phandle pcie-devid@210 needs 1, found 0 Jan -- Siemens AG, Technology Competence Center Embedded Linux
